Low Pressure Filters
CSD Water Removal Filters for Diesel
Remove water to extend fuel injector life & increase combustion engine fuel efficiency.
- Remove free water to saturation point with high single pass efficiency (achieve < 150 ppm single pass on #2 diesel)
- Rapid removal of gross free water.
- Ideal for construction fueling depots & tank farms
- Condition fuel during bulk tank fill, service truck filling or as kidney loop (maintain clean & dry fuel)
- Install in parallel with Hy-Pro LF series high flow assemblies (high efficiency particle removal)
- Optional Automatic water drain circuit for easy 24 x 7 unattended operation
F8 Medium Pressure High Flow Base Mount Filter
500 psi / 35 bar max operating F8 housing features large DFE rated Hy-Pro coreless element in several designs including HP8314. Top loading housing is ideal for high viscosity lube oil and the port to port mounting dimensions are a match for industry standard 8300 configuration. Full flow bypass valve is integral in the housing top cover. Media efficiency options down to 1 micron absolute, water removal and stainless steel mesh are available.
LF/LFM High Flow Filter
LF / LFM high flow filter assemblies feature Hy-Pro DFE rated coreless filter elements in single or multi-round configurations. Available in coated steel or stainless with pressure options up to 1500 psi / 102 bar LF / LFM assemblies are suitable for any fluid to cover a wide range of applications from high viscosity lubricating fluids to diesel fuel. Media options down to 1 micron absolute glass, water removal and stainless steel mesh.
LFW Wall Mounted Filter Assemblies
A compact, dedicated off-line contamination solution ideal for small reservoirs, gearboxes and diesel engine crankcase conditioning.
Coming in at a whopping 0 ft2 of floor space, the LFW is designed to get your filtration off the ground and positioned conveniently for you, whether you’re polishing off that high viscosity gearbox oil or just want to add a little more protection for your critical components from heavy contaminants. And with Hy-Pro filter elements inside, the possibilities are endless for what you can do with the LFW.
MF3 Medium Pressure In-Line Filter
MF3 medium pressure in-line filter with operating pressure up to 1200 psi / 83 bar features Hy-Pro DFE rated filter elements with media options down to 1 micron absolute, water removal and stainless steel mesh. MF3 is ideal for mobile equipment, hydrostatic charge circuits and is an excellent alternative to spin-on assemblies in off-line or return-line applications. MF3 is also a port to port dimension drop-in for 40CN housings and HK04 / HMK04 spin-on assemblies.
Spin-On Filter Assemblies
Low pressure spin-on assemblies with operating pressure to 200 psi / 14 bar are available in single and dual head designs to handle flow rates up to 100 gpm / 375 bar. Hy-Pro DFE rated elements are available in a wide range of media options down to 1 micron absolute, water removal and stainless steel mesh. Ideal for mobile equipment HPUs & low pressure return or off-line circuits. Ask us about medium pressure spin-on assemblies.
TF4 Low Pressure In-Tank Return Filter
TF4 in-tank return filter operating pressures to 150 psi / 10 bar Hy-Pro DFE rated coreless elements or optional HF4 automotive spec elements. TF4 is an ideal compact alternative to spin-ons for HPU return-lines and mobile equipment hydraulic systems. Media options down to 1 micron absolute, water removal and stainless steel mesh.
TFR Low Pressure In-Tank Return Filter
TFR in-tank return filter operating pressures to 150 psi / 10 bar and flow rates to 300 gpm / 1100 lpm with coarse glass media options. TFR features DFE rated inside to out flow direction elements to contain captures contaminant during element service (particles don’t run off into the reservoir). Each element has an integral bypass valve which prevents bypass valve spring fatigue and leaking (new bypass valve with every element change). Ideal for HPU return-lines and mobile equipment hydraulics.